E7014 Premium Arc Stick Electrodes 14in Welding Rod Hermetically Sealed 50-Pound Can
E7014 Premium Arc Stick Electrodes 14in Welding Rod Hermetically Sealed 50-Pound Can
E7024 Premium Arc Stick Electrodes 14in Welding Rod Hermetically Sealed 50-Pound Can
E7024 Premium Arc Stick Electrodes 14in Welding Rod Hermetically Sealed 50-Pound Can
E7014 Premium Arc Stick Electrodes 14in Welding Rod Hermetically Sealed 50-Pound Can
E7014 Premium Arc Stick Electrodes 14in Welding Rod Hermetically Sealed 50-Pound Can

E7014 Premium Arc Stick Electrodes 14in Welding Rod Hermetically Sealed 50-Pound Can

$167.21 Oferta

HYW E7014 Premium Arc Stick Electrodes combine the easy handling of a rutile rod with the higher deposition of an iron-powder coating, supplied in a 50 lb hermetically sealed steel can. The result is a smooth, fast arc that runs on AC or DC, fills gaps and poor fit-up with ease, and lays down clean 70,000 psi welds in all positions — well suited to high-production single- and multi-pass fabrication.

Key Features

  • › 50 lb hermetically sealed can preserves electrode integrity
  • › Iron-powder titania coating for high deposition and fast travel
  • › Smooth, easy arc that tolerates poor joint fit-up
  • › 70,000 psi tensile strength on AC or DC±
  • › All-position single- and multi-pass welding
  • › Easy slag removal with clean bead appearance

Ideal Applications

  • › General and structural fabrication
  • › Production and repetitive fillet/lap welds
  • › Maintenance and repair
  • › Light-to-medium plate assemblies

Technical Specifications

AWS Classification AWS A5.1 / ASME SFA-5.1 E7014
Tensile Strength 70,000 psi (483 MPa) minimum
Coating Type Iron Powder, Titania
Welding Current AC or DC± (DCEP / DCEN)
Welding Positions All positions — Flat, Horizontal, Vertical, Overhead
Package 50 lb hermetically sealed steel can

Typical Chemical Composition

Typical undiluted all-weld-metal analysis (wt %). Iron is the balance.

Element Typical Weld Metal (wt %)
Carbon (C) typ. 0.10
Manganese (Mn) typ. 0.55
Silicon (Si) typ. 0.40
Phosphorus (P) 0.03 max
Sulfur (S) 0.03 max
Iron (Fe) Balance

Mechanical Properties

Typical as-welded properties; values meet or exceed AWS A5.1 E7014 minimums. Iron-powder rutile, AC/DC.

Tensile Strength 70,000 psi (490 MPa) min — typ. 76,000 psi (525 MPa)
Yield Strength 58,000 psi (400 MPa) min — typ. 64,000 psi (440 MPa)
Elongation (2 in / 50 mm) 17% min — typ. 22%
Charpy V-Notch Impact Not required (typ. 50 ft·lbf @ 32 °F)

Available Sizes & Recommended Amperage

Diameter (× 14") Recommended Amperage
1/8" 110 – 160 A
5/32" 150 – 210 A

Packaging & Storage

Each can is hermetically sealed at the factory to keep electrodes dry and ready to weld. After opening, store the can in a clean, dry environment and reseal between uses to preserve performance.

Recommended amperage ranges are general guidelines; optimal settings vary with base-metal thickness, joint design, and welding position.

WARNING

This product can expose you to chemicals including manganese, which is known to the State of California to cause birth defects or other reproductive harm. Welding fumes from this product can also expose you to chemicals known to cause cancer. For more information go to www.P65Warnings.ca.gov.