Mild Steel - Solid Wire
Mild steel solid MIG/MAG welding wire (GMAW) from HYW Products in copper-coated ER70S-6 and low-alloy ER80S-D2. From general-purpose fabrication to high-strength, code-governed work, you'll find the right diameter and pack here — spools and drums in .023", .030", .035", and .045".
Buying guide, comparison chart, brand cross-reference & FAQ — click to expand
| Wire | AWS | Tensile | Shielding Gas | Best For |
|---|---|---|---|---|
| ER70S-6 | A5.18 | 70 ksi | 100% CO² or 75–80% Ar/CO² | General-purpose; X-ray welds over light rust & mill scale |
| ER80S-D2 | A5.28 | 80 ksi | 100% CO² or 75–80% Ar/CO² | High-strength low-alloy (0.5% Mo); creep/heat resistance, pressure work |
Both wires run on DC+ (DCEP). The shielding gas changes the arc: 100% CO² gives deeper penetration with more spatter; an Ar/CO² blend runs smoother with less spatter.
Cross-Reference & Brand Equivalents
Already buying a name-brand ER70S-6? The wires below are spec-equivalent to our ER70S-6 and can be replaced with it. Match the diameter and shielding gas, and confirm your welding procedure or code before switching.
| Brand | Their Product | Replace With (HYW) |
|---|---|---|
| Lincoln Electric | SuperArc L-56 | ER70S-6 |
| ESAB | Spoolarc 86 · OK Autrod 12.51 | ER70S-6 |
| Hobart | HB-28 | ER70S-6 |
Cross-references identify comparable ER70S-6 (AWS A5.18) products and are provided as a general guide only. Always confirm the product meets your specific application, welding procedure (WPS), or code requirements before substituting. All third-party brand and product names — SuperArc® and Lincoln Electric® (The Lincoln Electric Company), ESAB®, Spoolarc® and OK Autrod® (ESAB), and Hobart® and HB-28 (Hobart Brothers / ITW) — are trademarks of their respective owners. HYW Products / Hy-Weld Inc. is an independent distributor and is not affiliated with, authorized by, sponsored by, or endorsed by these companies; their names are used solely for identification and accurate comparison.
Shop by Wire
Frequently Asked Questions
What shielding gas does ER70S-6 use?
Run it on 100% CO² for deeper penetration (more spatter) or a 75–80% argon / CO² blend for a smoother arc and cleaner welds. Polarity is DC+ (DCEP).
ER80S-D2 vs ER70S-6 — which should I use?
ER70S-6 is the everyday 70 ksi general-purpose wire. ER80S-D2 adds ~0.5% molybdenum for higher 80 ksi strength and creep/elevated-temperature resistance — choose it for high-strength low-alloy steel, boilers, and pressure vessels.
Can I replace a SuperArc L-56, Spoolarc 86, OK Autrod 12.51, or HB-28 with HYW wire?
Yes — those are all ER70S-6 (AWS A5.18) wires, the same classification as ours, so our ER70S-6 is a spec-equivalent substitute. Match the diameter and shielding gas, and verify it meets your procedure or code before switching.
Also see: Mild Steel TIG Rod · Mild Steel Flux-Cored Wire
