E308L-16 1/8" x 14" 5 lbs Stainless Steel Electrode (5 LBS)
We accept payment by any of the following methods:
PayPal & Credit Card
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
We supply always very competitive price with high quality products.
2. Large Volume
We keep a lot of inventory. Please call us to get better price if you need large volume of products.
3. Fast shipping
We ship within 1 or 2 days after payments with USPS, Fedex and LTL or FTL serice.
4. Quick response & Responsibility
We answer all questions within a couple of hours in day time and if there is any problem on the products, we always accept the return and credit within 15 days.
Please contact us
Call : 678-691-7495
email : firstname.lastname@example.org
- Brand New European E308L-16 1/8" Welding Rod at Great Price & Quality.
- Good weldibility.
- Well sealed packing from moisture.
- We have other grades and size : E308L-16, E309L-16 & E316L-16 (3/32", 1/8" & 5/32")
|Welding of 18%Cr-18%Ni stainless steel such as AISI (SUS) 304L|
|E308L-16 are lime-titania type electrodes for all-position welding. As its weld metal has extra-low carbon austenitic structure which contains suitable ferrite, crack resistibility is good and intergranular corrosion resistibility is superior to that of E308-16. In the as-welded conditions the weld metal provides good corrosion resistibility and good mechanical properties.|
|Notes on usage|
|(1) Keep the arc as short as possible.|
|(2) Weaving width should be within two and a half times of electrode's diameter.|
|(3) When the electrodes have absorbed moisture, dry them at 250-300℃ for 60-90 minutes before use.|
|(4) Remove dirts such as oil and dust form the groove.|
|Typical chemical composition on weld metal (%)|
|Typical mechanical properties of weld metal|
|Size & recommended current range (AC or DC+)|
- Shipping for AK, HI, PR : Please contact us to check the actual freight. If we have to ship by UPS or USPS Priority mail (Not flat rate boxes), the freight would be more than what we listed.